Standard Parts

           فهرست تصویری قطعات پیش ساخته

 

 

  • All-Steel Die Set 5S...B/T

    ● Plates Material: St37 , St52 , 1.1730
    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.
    - Delivery time: 10 to 15 days respectively to dimensions of a1,b1.

  • Pressure Elastomer Spring D63/95

    ● Material : PUR/95 Shore A

  • PULL-DOWN CLAMP E3060

    ● Low Height
    ● Material: Heat-Treated Steel

    ...
  • PLAIN CLAMP E307

    ● Material : Heat-Treated Steel
    ● DIN 6314

    ...
  • SUPPORT E312

    ● Adjustable

  • T NUT E407

    ● DIN 508
    ● Tensile strength class 10.
    ● Full load capacity is only allowod with the full thread length matched.
    * Use the length of the thread.
    ** Excess of Din508

    ...
  • Guide Bush D11

    ● Material : ~ 1.7131 | 720HV
    ● DIN 16761-E

    ...
  • Ejector Pin-Cylindrical Head D41K

    ● DIN 1530 - ISO 6751
    ● Material: WAS(Hot Working Steel Nitrided)
    ● Plasma - Nitrided Black Oxidized

    ...
  • Locset Anaerobic Adhesive-Surface Sealing

    ● LOCSET Surface Sealing
    LOCSET surface sealing is used for complete sealing of two metal plates and flanges, so that after two plates are stacked, it fills all the scratches and creates the best surface sealing. Excess adhesive remaining in the inner case is not cured and can be removed without disturbing or contaminating it.

    ...
  • Locating Ring D100

    ●Material: 1.7131

    ...
  • Sliding Pad D065

    ● Non-Liquid Lubricant
    ● Material: Bronze/Cast Iron
    ● VDI 3357
    ● Are used in applications of linear or rotary motion in tool making, and similar engineering uses.
    ● Advantages of oilless guide elements:
    - Good emergency sliding properties.
    - Highest carrying capacity at low speed.
    - Useable under water or with chemical solutions.
    - Extremely wide temperature resistance hot and cold.
    - Damping properties in presence of vibration.

  • Rectangular Die Set CZ

    ● Cast Iron-Diagonal Pillars
    ● DIN 9819 Shape C and CG
    * Different from DIN 9819

    ...
  • Guide Pillar D011

    ● Material : ~ 1.7131 | 720HV
    ● The main advantages of D011 are easy moving in g6 and pressing fitness of m6 in reamed bore of H7.

    ...
  • All-Steel Die Set 3SH

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set 3SM

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set 3SZ

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • Green Spring D64G

    ● DIN/ISO 10243

  • PULL-DOWN CLAMP E3064

    ● Low Height Clamping Jaws
    ● Material: Cast Iron ,Heat-Treated Steel

  • PLAIN CLAMP E307/.../F

    ● Material : Heat-Treated Steel,Forged
    ● DIN 6314

    ...
  • T NUT (RHOMBUS) E408

    ● DIN 508
    ● Tensile strength class 10.
    ● Full load capacity is only allowod with the full thread length matched.

  • Date Marked Pins D480

    ● Special For Injectin Moulds

    ...
  • Ejector Pin-Cylindrical Head D41B

    ● DIN 1530 - ISO 6751
    ● Material: WAS(Hot Working Steel Nitrided)
    ● Plasma - Nitrided Bright Surface

  • Dowel Pin Extractor D251

    ● Extraction tool for the fast removal of dowels with internal extracting thread and also for shafts , plugs and other machine components.The tool comes interchangeable adaptors and screws, to fit all threads from M4 to M16.