Anaerobic

چسب آناروبیک (Anaerobic Glue)، چسب های صنعتی هستند که به صورت تک جزئی می باشند و در غیاب هوا (خلأ) و مابین دو سطح فلزی سخت می شود و اضافه چسب باقی مانده، در مجاورت هوا سخت نشده، به راحتی قابل پاک کردن است. سمی بودن آن ها  از دیگر خانواده اش کمتر است و بوی ملایم و نامطبوعی دارند و برای فلزات، خورنده نیستند. انواع مختلف چسب آناروبیک دارای غلظت، استحکام و تحمل دمایی متفاوت هستند. همچنین جنس آن ها دارای سطوح فعال، نیمه فعال و غیر فعال بوده و بر اساس نوع چسب، زود تر یا دیرتر و یا با استفاده فعال کننده عمل می نمایند.

چسب ستاک معمولا جهت اتصال ساختاری استفاده می شود که بیشتر جهت اتصال فلز به فلز، فلز به شیشه و به مقدارکمتر جهت چوب و پلاستیک استفاده می گردد. و در صنایع مختلفی از جمله هوا فضا، خودرو سازی، نفت و گاز، نظامی و… کاربرد دارند. و در ظروف پلی اتیلن با حجم های 20 ، 50 ، 250 گرمی و یا بیشتر نگهداری می شوند. همچنین وجود هوا در این ظروف ضروری است به طوری که قابل نگهداری در دمای اتاق و با درب بسته، به مدت حداقل یکسال می باشند. برای اطلاعات بیشتر با شماره ی 09102296673 تماس بگیرید.

چسب لاک ست به طوری کلی به 3 دسته تقسیم بندی می شوند:

- چسب قفل کننده، برای ایمنی و محکم نگه داشتن پیچ و مهره ها یا قفل کنندگی آن ها، که در اثر ارتعاش یا بار های ضربه ای به مرور باز می شوند، قابل استفاده است. چسب قفل کننده در رزوه استفاده می شود و از خوردگی جلوگیری نموده و آب بندی نیز می کند. و پس از چسباندن یا سخت شدن ، امکان بازکردن پیچ ، مهره یا رزوه با ابزار های معمولی وجود دارد.

- چسب آب بندی کننده (نشت بندی)، در اتصالات رزوه ای و لوله ها برای آب بندی و یا برطرف کردن احتمال نشتی (نشت بندی) بکار می رود و بر خلاف نوار تفلون یا خمیر و... در اثر ارتعاش، اتصال باز نشده و نشتی نخواهد داشت. محل اتصال ایجاد شده با چسب واشر ساز، از خوردگی محفوظ مانده و تا زمان باز کردن (با ابزار معمولی) خواص خود را حفظ می کند.

- چسب آب بندی سطوح یا چسب واشر ساز، برای درز بندی کامل دو صفحه فلزی و فلانچ ها به کار می رود به نحوی که پس از روی هم قرار دادن دو صفحه، کلیه ناصافی ها را پر کرده و بهترین درز بندی را به وجود می آورد. همچنین باقیمانده چسب واشر ساز، در محفظه داخلی سخت نشده، و بدون ایجاد مزاحمت یا آلودگی از آن خارج می شود.

  • Anaerobic Adhesive-Thread Loking

    ● LOCSET Thread Locking
    This group is used to secure the bolts or Thread locking , which may be opened continuously due to vibration or shock loads. The thread used prevents corrosion and sealing. By choosing the correct type of LOCSET, after curing, it is possible to open the screw, nut our thread with generally tools.

    ...
  • Locset Anaerobic Adhesive-Pipe Sealing

    ● LOCSET Pipe Sealing
    LOCSET Sealing are used in threaded joints and pipes to sealing or eliminate the possibility of leakage.The connection does not open and will not leak due to vibration.the joint is protected from corrosion and retains its properties until opened(with generally tools)

    ...
  • Locset Anaerobic Adhesive-Surface Sealing

    ● LOCSET Surface Sealing
    LOCSET surface sealing is used for complete sealing of two metal plates and flanges, so that after two plates are stacked, it fills all the scratches and creates the best surface sealing. Excess adhesive remaining in the inner case is not cured and can be removed without disturbing or contaminating it.

  • Locset Anaerobic Adhesive -Retaining or Joining

    ● LOCSET Retaining or Joining
    LOCSET Retaining or Joining for installing cylindrical (coaxial) parts, gears, sprockets, bushings, bearings and... Used in housing or on the shaft and with excellent strength, they even cause even permanent connection. Adhesives of this group are the best alternative for pressing Tolerances and even precision Tolerances and is also suitable for parts that are loose in place.

  • Locset Liquid Adhesives -UV

    LOCSET U.V adhesive are one component and solvent free.
    They are used for bonding parts made of glass , ceramics , synthetic mterials ( plasics ) and matrials that need ineffective ( transparts ) or sired production and assembly ( fast hardening )

    ● Advantages:
    1-one-component
    2-easy to handle
    3-fast cure
    4-cure at room temperature
    5-low conectration of pollutant substances at workspace
    6-low temperature development during curing
    ● liquid UV
    The Liquid UV adhesives based on acrylate for bonding of glass , translucent synthetic materials among each other or with metals , ceramics and non-translucent synthetic materials.
    The adhesivs are one-component, They cure at room temperature visible light

  • Locset Anaerobic Adhesives -UV

    LOCSET U.V. adhesive are one component and solvent free.
    They are used for bonding parts made of glas , ceramics , synthetic materials ( plastics ) and materials that need ineffective ( transparent parts ) or sired prodution and assembly ( fast hardening ).

    ● Advantages:
    1-on-component
    2-easy to handle
    3-fast cure
    4-cure at room temperature
    5-low conectration of pollutant substances at workplace
    6-low temperature development during curing
    ● Anaerobic UV
    The anaerobic adhesives are one - component , and specially suitable for serial production or the fixture time rapidly , also for fastening of coaxial components , bushing , bearings and shaft of metal parts , metal to glass , glass to rubber , glass to ceramics , and glass to glass

    ...