فارسی
English
русский
Standard Mould Making Component
-
Mould M1616
● مزیت بزرگ بدنه های قالب ستاک, ارائه كلاس دقت و قابلیت تعویض ، جابجایی و تغییر صفحات و اجزاء به هر دلیل و نیز وجود مبنای مناسب برای ماشینکاری است.
... -
Gate Valve (Pneumatic) D566
● Needle valve systems are an important tool in controlling the hot injection process. These valves give outstanding features to the produced parts and process by opening and closing the nozzle inlet. Some of the features of this system are:
1- Ensure that unwanted material does not overflow into the cavity
2- Disconnect the material inside the nozzle from the part
3- Ability to achieve higher quality parts of the piece.
4- More hiding the effect of the injection.
5- Ability to eliminate cold welding in large parts that are filled with several nozzles.
6- Achieving the desired quality for large and complex parts with the possibility of selecting the order and creating sequences in opening and closing the nozzles.
7- Reduce injection pressure
8- Reduce injection time -
Plate F80
● Materiyal: 2312
● M10 : t= 15 , t1=20
● M12 : t= 18 , t1=25
● M16 : t= 26 , t1=36
● M20 : t= 22 , t1=46... -
Raha Series Nozzle D5368
● Body Material: WAS (Hot Working Steel Nitrided)
- Core material can be changed on request.... -
Raha Series Nozzle D5369
● Body Material: WAS (Hot Working Steel Nitrided)
- Core material can be changed on request.... -
Raha Series Nozzle D5378
● Body Material: WAS (Hot Working Steel Nitrided)
- Core material can be changed on request.... -
Raha 536 Series Nozzle D5379
● Body Material: WAS (Hot Working Steel Nitrided)
- Core material can be changed on request....
